Accountabilities
HSE Strategy, Governance & Leadership:

• Deploy the Project HSE Strategy, objectives, and annual HSE plan aligned with corporate standards andproject risk profile across Project Offshore Packages-Well Head Platform & SURF
• Coordinate key package forums (e.g., Package HSE Committee & PTW weekly meetings, JRA,SIMOPS/Operational Readiness HSE reviews, audits/Inspections, Equipment /Material Post Mob, etc).
• Ensure clear interfaces across packages and stakeholders to maintain consistent HSE requirements and controls

Risk Evaluation and Management:

• Own the project hazards risk management framework, ensuring hazards are identified, risks reduced to ALARP, and critical controls/barriers are effective
• Ensure effective Management of Change (MoC) and HSE gates for project phase transitions
• Ensure Risk Management during the project phases are implemented across the packages.
• Contribute to the completion of PTW and the documents needed prior to operations and see that prescriptions are applied.
• Ensure a robust approach to permit-to-work, lifting operations, WAH, confined space, energy isolation, driving safety, and marine operations controls

Package HSE Methods:

• Plan and perform HSE Audit and Inspection on site and participate in construction yards.
• Ensure good collation and reporting of site monthly HSE statistics, manhours, analyze, translate, and implement them as mitigative actions to prevent incidents.
• Participate in site Emergency Response management and contingency systems and check on the efficiency of their application.
• Lead or take part in incident, accident, near-misses and anomaly investigations and analyses
• to determine root causes and implement corrective actions to prevent reoccurrence
• Input all HSE information (actions from HSE reports, anomalies, incidents) into Synergi.
• Contribute to HSE performance improvement and associated monitoring.
• HSE Management & Interface Control & Performance Improvement
• Follow-up of site personnel (Company and Contractor) HSE induction, onboarding, training and preparedness, ensuring adequate attention is drawn to any lack of compliance.
• Conduct regular check on the state of all HSE equipment and material to ensure sound functioning and readiness for deployment in case of emergency.
• Ensures that waste procedures and equipment are provided to facilitate segregation of waste on site and waste audits are conducted and corrective actions are followed up on site.
• Ensures that stocks of necessary HSE consumables e.g., hand-gloves, earmuffs/plugs, disposable coverall,
• spare fire extinguishers are maintained at appropriate levels.
• Liaise with Contractor to collate Contractor HSE information (Reports, Man-hours, etc)
• Maintain Site Health, Safety and Environmental records and to organize and participate in audits to ensure the effective implementation of HSE rules on site.
• Advocate adequate levels of anomaly reporting amongst work force to mitigate against incidents.
• Foster a strong safety culture throughout the organization by encouraging safe behaviors, recognizing achievements, and promoting open communication.
• Maintain accurate and up-to-date records of safety inspections, anomalies, incidents, training, and other HSE related activities.
• Track and report HSE performance metrics to management, identifying trends and recommending actions to improve performance.
• Continuous Improvement: Continuously seek opportunities to enhance the HSE management system and promote a safer and more sustainable working environment.

Qualifications

• Degree in Engineering or Science discipline
• 10 + years of experience in a Health, Safety and Environment position with operational exposure
• Operational exposure in the Oil & Gas industry
• Certified Lead auditor in any of the ISO standards (ISO 14001, 45001, 9001, etc)
• Sound knowledge in: HSE management system and implementation on Oil & Gas operations, Contractors
• HSE management,
• Required skills & experience: communication (verbal & written), writing of procedures, investigation, reporting,
• auditing, continuous improvement (quality), problem solving, Good communication skills. Good team player,
• able to communicate effectively with colleague
• Proficiency with Microsoft applications.

Additional Information:

• Applicant must be Nigerians.

Job Description

• The selected personnel will be responsible for supervision of the Quality activities (QA & QC) within the Package.
• Shall ensure that project activities comply with COMPANY rules & project procedures.
• For Quality Assurance (QA), this entails:
  • Assist Package Management in measurement and reporting of KPI. Assist the QA/QC Manager in promotion of Quality Culture.
  • For Quality Control (QC), this entails:
  • Externally, Manage Quality Surveillance above Contractors, Subcontractors and vendors. Review of technical documentation from suppliers for adequacy (enforcement to Quality specifications)
  • Internally, Ensure Project activities comply with CPY rules & project policy and procedures. Attend internal audit.

Accountabilities

• Support and enforce the COMPANY HSEQ charters, objectives, directives. Prepare, Update, Support and implement the related Quality Management System (standards, plans, procedures, specifications, …)
• Promote Quality in the project and provide Quality advice.
• Review the QMS related documents.
• Review contents of CONTRACTOR Quality Control and Inspection procedures including ITP(s)
• Attend CONTRACTOR qualification tests (WPQR, WQT, NDT etc.)
• Supervise and coordinate COMPANY Hold/ Monitor/Witness /Review inspection activities
• Coordinate pre-mobilization checks of construction Equipment as per Site rules and maintain up to date register of construction equipment.
• Ensure accurate reporting of all Quality Control activities within Company package organization.
• Investigate any identified or reported problem in the application of Project QMS and propose solutions/improvements to the concerned Managers.
• Ensure that Project Quality reviews are regularly and properly conducted. Ensure that the decided actions are
• diligently completed (actions monitoring)
• Prepare and implement External Audit Plan covering Contractors and Subcontractors. Ensure that the related QMS are in accordance with the requirements.
• Monitor the External audit findings & remarks, and any other reported Quality problems, through periodic meetings with Contractors.
• Report the QA audit findings and Quality concerns to management and if necessary, suggest an action/improvement plan.
• Issue and review Quality Control Plans. Monitor the Quality Control on the different sites (Materials, Welding, NDT, Coating, etc.)
• Review and report to Head of QA/QC any quality problems or difficulties reported by QA/QC Team member.
• Manage QA/QC Team & competencies to reach project and package objectives
• Support and guide Contractor in its Quality duties
• Carry out any other duties as may be required by hierarchy and project management.

Qualifications

• Professional Experience in similar position (number of years): 10
• Experience within Oil & Gas project: (number of years): 10
• Good knowledge in QMS, construction, pipe laying, metallurgy, Welding, NDT, coating and pre-commissioning
• Good knowledge in construction codes and international standards used in O&G industry
• Must have integrity, be flexible and proactive
• Must demonstrate ability to act independently as part of a team
• Good communication skills. Good team player, able to communicate effectively with colleague
• Proficiency with Microsoft applications.

Additional Information:

• Applicant must be Nigerian nationals.

Job Purpose

• Provide on-site inspection and technical surveillance of electrical and instrumentation/ICSS fabrication, installation, testing, and completion activities at the CSP fabrication yard.
• Ensure compliance with approved drawings, specifications, applicable codes and standards, COMPANY requirements, and the EPCC Contract.
• The role supports the Yard Construction Lead in identifying and resolving quality and technical issues, minimizing rework, driving punch-list closure, and ensuring E&I works are safely completed to the required quality and Project schedule through load-out and sail-away.

Activities
HSE & Safe Work Execution:

• Promote COMPANY HSE requirements and safe execution of electrical, instrumentation and ICSS works.
• Verify compliance with applicable PTW, JSA, method statements, isolation/energization and installation requirements.
• Identify and promptly report unsafe conditions or practices.

E&I Construction Surveillance:

• Monitor installation of electrical equipment, cables, trays, earthing, instruments, junction boxes, panels, and ICSS equipment.
• Verify compliance with approved drawings, specifications, procedures, applicable codes and standards, and EPCC requirements.
• Verify correct material identification, handling, preservation, and installation of E&I equipment and materials.

Inspection & Quality Assurance:

• Perform surveillance and witness inspections/tests in accordance with approved ITPs.
• Monitor cable testing, termination, earthing, insulation resistance, instrument calibration, loop checks, and other E&I testing activities.
• Identify non-conformities and follow Contractor corrective actions through closure.

Completion & Punch List:

• Participate in E&I completion walkdowns and system/subsystem inspections.
• Raise and follow up punch-list items through satisfactory closure.
• Verify E&I and ICSS readiness for pre-commissioning and HUC.
• Technical & Interface Coordination
• Support resolution of technical queries, field changes, clashes, and construction issues.
• Coordinate E&I/ICSS interfaces with Engineering, QA/QC, HSE, Commissioning, and other construction disciplines.
• Escalate critical technical, quality, or schedule issues to the Yard Construction Lead.

Progress, Load-out & Handover:

• Monitor E&I/ICSS progress and highlight constraints affecting completion or schedule.
• Support readiness for load-out and sail-away, including preservation and outstanding work status.
• Support handover to offshore installation/HUC and follow up of outstanding E&I/ICSS works.

Additional Information:

• Applicant must be Nigerian nationals.

Job Description

• As a general manner, to provide assistance to the Project Management for all matters related to general administration, secretarial and related logistics matters at Site for the IMA Project.
• To organize and follow up on Site Management.
• To type / register / manage outgoing correspondences or any paperwork for Project Management team as requested
• To manage and order necessary offices supplies required at Site
• To organize or give assistance for the organization of meetings and associated logistics (internal meetings /meetings with Partners / Contractors or special events)
• To receive / dispatch / register / manage information and correspondences
• To welcome and guide visitors to the Site,
• To assist in the organization of the arrival of newcomers and departures (assignment of offices, IT and phone equipment…)
• To organize and manage accommodation of personnel at Site, assignment of rooms to personnel,
• To interface between Project and Contractor Admin in the areas of accommodation and other related admin matters
• To manage rotation schedule of Company and Contractor Personnel

Qualifications

• Level / Diploma: B.SC or HND
• Professional Experience (years): 5-10
• Experience in similar position (years): 5
• Languages: English mandatory.

Additional Information:

• Applicant must be Nigerian nationals

Activities
HSE & Safe Work Execution:

• Promote COMPANY HSE requirements and safe execution of piping and mechanical works.
• Verify compliance with applicable PTW, JSA, method statements, and lifting requirements.
• Identify and promptly report unsafe conditions or practices.

Construction Surveillance:

• Monitor piping fabrication, installation, supports, valves, mechanical equipment installation, and associated works.
• Verify compliance with approved drawings, specifications, procedures, codes and standards, and EPCCrequirements.
• Verify correct material identification, handling, preservation, and installation.

Inspection & Quality Assurance:

• Perform surveillance and witness inspections/tests in accordance with approved ITPs.
• Monitor pressure testing, flushing/cleaning, reinstatement, dimensional control, and final inspections.
• Identify non-conformities and follow Contractor corrective actions through closure.

Mechanical Completion & Punch List:

• Participate in mechanical completion walkdowns and system/subsystem inspections.
• Raise and follow up punch-list items through satisfactory closure.
• Verify piping and mechanical readiness for pre-commissioning and HUC.

Technical & Interface Coordination:

• Support resolution of technical queries, field changes, clashes, and construction issues.
• Coordinate piping/mechanical interfaces with Engineering, QA/QC, HSE, Commissioning, and other construction disciplines.
• Escalate critical technical, quality, or schedule issues to the Yard Construction Lead.

Progress, Load-out & Handover:

• Monitor piping/mechanical progress and highlight constraints impacting mechanical completion or schedule.
• Support readiness reviews for load-out and sail-away, including preservation and outstanding work status.
• Support handover to offshore installation/HUC and provide offshore follow-up where required.

Context and Environment:

• IMA WHP is located in OML112/117 8km from Bonny Island shore and is tied back to BNAG plant an NEPL/WAGL facility, operated by Renaissance.
• Operations control of IMA is provided from Amenam platform operated by Company via a LOS telecom connection.
• Offshore water depth is around 8m with AMNI facilities in close vicinity

Accountabilities

• Ensure piping and mechanical works comply with approved specifications, drawings, ITPs, codes, and EPCCrequirements.
• Provide effective construction surveillance and quality control, driving timely resolution of defects and non-conformities.
• Drive mechanical completion and punch-list closure to meet Project schedule and HUC readiness.
• Ensure safe execution and readiness of piping/mechanical systems for load-out, sail-away, and offshoreHUC.

Qualifications

• Degree/HND in Mechanical engineering or equivalent technical discipline : 3
• Piping & Mechanical Construction Inspection: 4
• Codes, Standard & Quality Requirements (Good working knowledge of ASME, GS and Other relevant International stds); 3
• Mechanical completion, Punchlist management, load- out readiness and construction interface experience; 4
• (Degree of mastery: 1: weak – 2: medium – 3: good – 4: excellent)
• Professional Experience (number of years) : 8 to 10
• Experience within Construction in Oil and Gas projects: (number of years) : 5

Additional Information:

• Applicant must be Nigerian nationals.

Activities
H3SE & compliance:

• Adopt and demonstrate exemplary behaviour regarding H3SE, to implement H3SE rules and requirementswithin his area of responsibility and to ensure that required H3SE competencies are within his team.
• Demonstrate an exemplary behaviour regarding the Company Ethics and “Code of Conduct” policy and topromote and enforce the Anti-Corruption Program within his team.
• Verify that H3SE rules are understood and respected on the worksites (H3SE awareness) and to ensure safeworking practices are used by Contractors along all phases of project.

Primary Responsibilities:

• Review and validate the shore-pull execution philosophy and basis definition from a civil engineering andconstructability perspective, covering temporary works, civil works scope, access and laydown areas, beachpreparation, pulling pad, winch foundation, trenching/backfilling, pipe support arrangements, beach crossingconstraints, contingency philosophy and site readiness strategy.
• Review the EPC contractor’s proposed execution approach, construction sequence, subcontracting strategy,resources, schedule assumptions and main execution risks related to the shore-pull works.
• Review required tender documents related to shore-pull civil works, temporary works, subcontractor capability,construction methodology, site preparation and execution readiness requirements.
• Review contractor technical proposals, deviations, qualifications and clarifications related to shore-pull civilworks, constructability, subcontractor competence, execution planning, HSE risks and readiness requirementsfor FID.
• Lead and coordinate the review and validation of all shore-pull civil engineering and construction deliverablesissued by the EPC contractor and its subcontractors.
• Ensure that the EPC contractor mobilizes a competent shore-pull/civil works subcontractor with adequateexperience, qualified supervision, trained personnel, equipment, consumables, HSE resources and logisticalsupport.
• Review and validate method statements, execution plans, construction procedures, inspection and test plans,lifting/pulling procedures, temporary works designs, risk assessments and readiness dossiers for shore-pullactivities.
• Verify subcontractor readiness before mobilization, including organization, manpower plan, equipment list,maintenance status, method-specific competencies, lifting/pulling expertise, emergency arrangements and sitesupervision coverage.
• Validate the design and installation of temporary civil works required for shore pulling, including access roads,laydown areas, pulling pad, winch foundation, anchor blocks, rollers/cradles, pipe supports, trench stability andbeach crossing preparation.
• Be present on site during shore-pull preparation and execution to monitor compliance with approved procedures,resolve technical and construction issues, support site decision-making and ensure safe execution.
• Coordinate with marine, pipeline, onshore construction, HSE, QA/QC and operations representatives to ensurethat shore-pull interfaces are identified, controlled and closed before execution.
• Challenge contractor assumptions, construction sequences, resource loading, weather and tidal constraints,contingency measures and critical path activities affecting shore-pull readiness and execution.
• Participate in constructability reviews, readiness reviews, site inspections, HSE workshops, risk assessments,lifting/pulling reviews, toolbox preparation and pre-start verification before shore-pull operations.
• Report progress, critical issues, technical risks, subcontractor performance concerns and required decisions tothe SURF Package Manager and relevant project stakeholders.

Support to rest of Project and Package Manager:

• Ensure shore-pull interfaces with pipeline design, marine operations, onshore construction, civil subcontractor, HSE, QA/QC, Field Operations, authorities and local stakeholders are identified, managed and closed in due time.
• Support interface clarification with geotechnical, environmental, permitting, logistics, procurement, fabrication, installation contractor and operations teams.
• Review and validate technical documents required for partners, authorities, certifying bodies, marine warranty surveyor or third-party approvals where applicable.
• Anticipate civil works, temporary works, access, subcontractor or site readiness issues that may impact other packages, schedule, cost, HSE or operational integrity, and propose mitigation actions.

Qualifications

• University degree in Engineering or related field
• (Degree of mastery: 1: weak – 2: medium – 3: good – 4: excellent)
• Civil Engineering/Professional Experience (number of years) : 15
• Experience within project and project management: (number of years) : 10
• Project management  : 3
• Contractor Management: 3
• Civil engineering, temporary works and shore-pull construction management:4
• Method statement review, execution planning, subcontractor readiness and site supervision: 4.

Additional Information:

• Applicant must be Nigerian nationals.